Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Florence-Graham, CA
Sherwood Chimney Sweep handles chimney repair, sweeping, and dryer vent work throughout Florence-Graham, CA. This unincorporated community runs on 1920s through 1950s housing stock, and those original masonry chimneys are now 70 to 100 years old. Most were built with clay tile flues and no modern liner, which means repair is often the first thing we address, not an afterthought. If you own a home near the 110 Freeway or south of Florence Avenue, you’re likely dealing with cracks, failed mortar crowns, or liner damage. Call (833) 589-8498 when you want a straight answer about what’s actually wrong.
Why Florence-Graham Homes Are Different
Florence-Graham is densely built, with single-story stucco bungalows and small ranch houses sitting close together on narrow lots. The chimneys on these homes are almost entirely original brick or concrete block, often with clay tile flue liners that were installed when the houses went up. Those liners crack. The warm, dry summers and mild winters mean fireplaces sit unused for months at a time, and that idle period lets creosote harden into a stubborn glaze that a basic brush sweep won’t remove. Birds and squirrels nest freely in uncapped flues during the off season, and we find those nests during fall inspections.
The blocks near the 110 Freeway have their own specific problem. Decades of freeway vibration, combined with the area’s seismic history, produce hairline cracks in mortar crowns and clay tile joints. We routinely find failed crowns that let water seep into the chimney structure from the top down. In an unlined masonry chimney, water plus old mortar equals spalling brick and deteriorating joints. Florence-Graham is not a place where you can skip the inspection and just run a brush through. The repair conversation usually starts at the first sweep, because the damage is already there.
Styles & brands we work with
Our Main Florence-Graham Services
Florence-Graham homeowners call us most about two things: getting the chimney swept before burning season, and getting the dryer vent cleared before it becomes a fire hazard. Both are fire-prevention work, and we treat them that way.
Chimney Sweep in Florence-Graham
Most Florence-Graham chimneys need more than a quick brush pass. The idle months harden creosote, and uncapped flues collect nests and debris. Our sweep includes a camera inspection of the flue, because in this housing stock the lining is often cracked and needs assessment before you light the first fire of winter. We remove the creosote, clear the blockages, and tell you plainly whether the liner is safe or needs repair. Learn more about our Chimney Sweep in Florence-Graham service.
Dryer Vent Cleaning in Florence-Graham
Dryer vents in older Florence-Graham homes are often long, narrow, and routed through cramped interior walls. Lint builds up faster than homeowners expect, and the lead cause of household dryer fires is exactly that buildup. We clean the full vent run from the dryer to the exterior termination, and we check for kinks, crushed sections, and improper termination that trap heat. It’s fire prevention, done the same day as a chimney sweep when homes need both. See how our Dryer Vent Cleaning in Florence-Graham service works.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Florence-Graham
Chimney repair in Florence-Graham starts with the age of the house. The 1920s through 1950s bungalows and ranches here were built with clay tile flue liners, and after 70 plus years those tiles are cracked, shifted, or missing mortar at the joints. Add the freeway vibration near the 110 and the area’s earthquake history, and you get chimneys that look fine from the ground but are structurally compromised inside. Our Chimney Repair work begins with a camera inspection so you see exactly what we see, and we never recommend a repair without the footage to back it up.
Chimney Cap Installation
Signs you need it
Birds, squirrels, or nesting material inside the flue, water stains on the ceiling near the chimney, or a visible rusted or damaged cap from the ground.
What it costs in Florence-Graham
Chimney cap installation in Florence-Graham typically runs $250 to $650 depending on flue size and cap material.
How we do it
We measure the flue opening, install the correct cap base and lid with proper fasteners, and seal the attachment points against moisture.
Chimney Liner Installation
Signs you need it
Crumbling clay tile at the top of the flue, visible smoke staining on exterior brick, or a camera inspection that shows cracked joints and separated tile sections.
What it costs in Florence-Graham
Chimney liner installation in Florence-Graham typically runs $2,500 to $6,500 depending on chimney height and liner type, with DuraFlex flexible liner systems in our stock for most jobs.
How we do it
We run a camera inspection to measure the exact liner diameter and length, then install the liner with full insulation and a proper top plate and crown seal.
Chimney Flashing Repair
Signs you need it
Water staining on the walls or ceiling around the chimney chase, damp brick after rain, or visible gaps between the flashing and the roofline.
What it costs in Florence-Graham
Chimney flashing repair in Florence-Graham typically runs $350 to $900 on the flat-roof ranch houses that dominate the area.
How we do it
We inspect the flashing and counter-flashing at the roof junction, seal the failing sections or replace the flashing entirely, and test for water intrusion before we finish.
Chimney Crown Repair
Signs you need it
Hairline cracks across the crown surface, crumbling mortar at the chimney top, or water pooling on the crown instead of running off.
What it costs in Florence-Graham
Chimney crown repair in Florence-Graham typically runs $450 to $1,200 depending on crown size and whether we need to rebuild the form.
How we do it
We remove the deteriorated crown material, build a new form with a proper drip edge, pour the fresh crown, and apply a Gelco water repellent finish.
What Chimney Repair Costs in Florence-Graham
| Item | Typical range in Florence-Graham |
|---|---|
| Chimney cap installation | $250 – $650 |
| Chimney liner installation | $2,500 – $6,500 |
| Chimney flashing repair | $350 – $900 |
| Chimney crown repair | $450 – $1,200 |
Do I need a new liner, or can the old one be restored?
Not every cracked liner needs replacement. We carry HeatShield ceramic resurfacing capability, which restores deteriorating flue liners without a full tear-out, and in Florence-Graham that saves homeowners thousands over liner replacement. Call (833) 589-8498 for a camera inspection and an honest assessment.
How do I know if my chimney was damaged by earthquakes?
The camera inspection is the definitive answer. In Florence-Graham we routinely find cracked clay tile joints and shifted tile sections that are only visible from inside the flue, and freeway vibration makes this worse near the 110. We show you the footage before recommending any repair.
Brands We Service in Florence-Graham
We install and work with professional-grade materials from Gelco, Olympia Chimney, Famco, and Copperfield. These are the same products specified by certified chimney engineers nationwide, not big-box substitutes. We stock the common parts locally for most Florence-Graham jobs, which keeps turnaround short. See our brands for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Florence-Graham, CA
| Service | Typical range in Florence-Graham |
|---|---|
| Chimney sweep | $169 – $249 |
| Dryer vent cleaning | $99 – $175 |
| Chimney cap installation | $250 – $650 |
| Chimney liner installation | $2,500 – $6,500 |
| Chimney flashing repair | $350 – $900 |
| Chimney crown repair | $450 – $1,200 |
In Florence-Graham, two things push chimney repair prices up: access. Tight lots and attached garages mean ladders and staging have to be set up carefully, and that takes time. Second, older masonry often hides damage that’s only visible once we open the crown or run the camera. When you book with Sherwood Chimney Sweep, the price is agreed before we begin, and nothing changes without a call to you first.
Neighborhoods We Serve in Florence-Graham
We work across the full 90001 ZIP code and the surrounding Florence-Graham neighborhoods. Most appointments are scheduled within a few business days, and we consolidate jobs in the area to reduce driving time when possible.
- Florence-Graham proper, south of Florence Avenue
- Blocks adjacent to the 110 Freeway corridor
- Homes near Graham Avenue and Compton Avenue
- The residential streets north of Gage Avenue
Service Area – Cities Near Florence-Graham
Sherwood Chimney Sweep also serves the surrounding communities in south LA County. We work in Huntington Park, CA to the east, Walnut Park, CA to the south, Willowbrook, CA across the 110, and South Gate, CA further down the corridor. If you’re in one of these cities, the same flat-price sweep and camera inspection applies.
Serving Florence-Graham, CA — Our Local Coverage Area
We’re based in the Florence-Graham area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Florence-Graham
We schedule most Florence-Graham appointments within three to five business days. Fall fills up faster because everyone thinks about their chimney before the first cold snap. If you’re calling before burning season, book early and we’ll find a slot.
Most routine chimney repair like cap replacement, flashing, and crown work does not need a permit in unincorporated LA County. Liner installation may require inspection in some cases, and we handle the paperwork when it’s needed. You’ll know before we start.
Yes. We cover the full 90001 ZIP code and the surrounding blocks of Florence-Graham without charging extra for the neighborhood you’re in. The call is how we schedule, so reach us at (833) 589-8498 and we’ll confirm availability for your street.
If your Florence-Graham chimney hasn’t been inspected in the last year, or you know the liner is original to the house, call Sherwood Chimney Sweep today at (833) 589-8498 for a free estimate. We’ll show you exactly what’s going on inside your flue before any work is recommended.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Florence-Graham Customers Say
"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Tamika Whitfield"Weekend rate was higher, which they told me up front and I was fine with. What I wasn't expecting was for someone to actually come out on a Sunday."
— Ernesto Reyes"Drop cloths everywhere, HEPA vac, and not a speck of soot on the carpet. I'd been dreading the mess for nothing."
— Gilbert Torres