Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Chino, CA
Chimney repair in Chino is the service we field the most calls about, and it usually comes down to the same story: a prefab metal firebox from the 1980s or 1990s has finally hit the end of its service life, or a masonry fireplace near downtown was built before modern liner standards existed. Chino’s housing stock is young enough that most chimneys are only now reaching the age where they need real structural attention. We’re Sherwood Chimney Sweep, and we’ve served Chino since 2017. Call (833) 589-8498 if you want a straight answer about what your chimney actually needs.
Why Chino Homes Are Different
Chino’s chimney work is dominated by the massive 1980s to 2000s tract-home build-out in the 91710 corridor. Thousands of homes share the same prefab metal firebox and zero-clearance flue designs, which means most jobs are identical factory-installed systems with predictable failure points, not the varied masonry stacks you’d find in older neighboring cities like Pomona or Ontario. When we pull up to a house in a tract neighborhood, we often recognize the builder’s original damper and spark-arrestor design before we even get on the roof.
That repetition cuts both ways. On one hand, it means we know exactly where these systems fail: the chase top flashing, the galvanized cap assembly, the refractory panels inside the firebox. On the other hand, it means when a neighbor’s identical chimney fails inspection, we get a cluster of calls from the same block within weeks. The hot inland summer doesn’t help. Fireplaces sit idle for eight months while temperatures hover in the high 90s and triple digits. Creosote from the previous winter hardens into a glaze, and birds or rodents find their way into open chase tops. The older ranch homes around downtown Chino, mostly 1950s and 60s construction, bring a different set of issues: masonry fireplaces that often lack modern liners entirely.
Styles & brands we work with
Our Main Chino Services
Most Chino homeowners reach out to us for two reasons: an annual sweep before burning season, or a dryer vent that’s never been touched since the house was built. Both are fire-prevention work under one roof.
Chimney Sweep in Chino
A sweep in Chino is less about brushing out heavy creosote and more about inspecting a system that’s been sitting in summer heat for months. We remove the hardened deposits, clear any nesting material from the flue, and check every component from the firebox to the chase top. In the 91710 tract homes, we’re specifically looking for the failure points common to that era of factory-built chimney. If you have a wood-burning fireplace or gas insert that hasn’t been looked at in years, the full breakdown is on our Chimney Sweep in Chino page.
Dryer Vent Cleaning in Chino
Dryer vents in Chino’s 1980s to 2000s homes are often long runs that snake through interior walls before exiting at the roof or side of the house. Lint accumulates faster in these longer runs, and the combination of restricted airflow and a hot dryer is the leading cause of household dryer fires. We clean the full run from the dryer connection to the exterior termination, and we check the vent material itself: many builder-installed vents are foil or flexible vinyl, which trap lint and should be replaced. Details are on our Dryer Vent Cleaning in Chino page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Chino
Chimney repair in Chino usually means one of two things: the factory-installed components on a 20 to 40-year-old prefab system have corroded or cracked, or an older masonry fireplace near downtown has mortar and crown damage that’s letting water into the structure. The Santa Ana winds that sweep through Chino in the fall put real stress on caps and flashing, and the summer heat accelerates rust on metal components. Repairing these issues before burning season is cheaper than waiting for a failed inspection or a leak to show up on the ceiling. That’s the work we do as a full-service Chimney Repair specialist, from sourcing professional-grade materials to doing the installation right.
Chimney Cap Installation
Signs you need it
Your cap is missing, rusted through, or you can hear animals in the flue from inside the house.
What it costs in Chino
Chimney cap installation in Chino typically runs from $300 to $600, depending on the cap size and chase-top configuration.
How we do it
We remove any remaining old cap, inspect the flue opening and chase top, then mount a correctly sized stainless or galvanized cap secured to the flue tile or metal chase.
Chimney Liner Installation
Signs you need it
Your existing clay tile liner is cracked or spalling, or your home has an unlined masonry chimney that fails modern fire-code requirements.
What it costs in Chino
Chimney liner installation in Chino typically runs from $2,500 to $5,000, with stainless steel as the most common material for wood-burning fireplaces.
How we do it
We size the liner to your appliance and flue dimensions, run it through the existing chimney cavity, insulate where the code requires, and connect it to the appliance with a proper top plate and cap.
Chimney Flashing Repair
Signs you need it
You see water staining on the ceiling near the chimney, or the metal flashing at the roofline is lifted, corroded, or separated from the brick or chase.
What it costs in Chino
Chimney flashing repair in Chino typically costs between $350 and $700, depending on how much of the existing flashing must be removed and replaced.
How we do it
We cut out the old flashing, install new step and counter flashing integrated with the roofing material, and seal all transition points with a high-temperature, weather-rated sealant.
Chimney Crown Repair
Signs you need it
The concrete crown at the top of your masonry chimney is cracked, spalling, or showing visible gaps that let water into the brick below.
What it costs in Chino
Chimney crown repair in Chino typically runs from $500 to $1,200, depending on the extent of the cracking and whether resurfacing or full recasting is required.
How we do it
We inspect the existing crown for structural soundness, repair minor cracks with a polymer-modified crown coat, or remove and recast the crown with a properly sloped, overhanging form when the damage is extensive.
What Chimney Repair Costs in Chino
| Item | Typical range in Chino |
|---|---|
| Chimney cap installation | $300 – $600 |
| Chimney flashing repair | $350 – $700 |
| Chimney crown repair | $500 – $1,200 |
What pushes prices up in Chino is roof access on two-story stucco tract homes, which changes ladder and safety setup. Larger chase tops on prefab systems also cost more than standard masonry flue openings.
Can you repair a prefab metal chimney in Chino?
Yes. Most 1980s to 2000s homes in Chino have factory-built chimneys, and we repair the specific components: chase tops, caps, flashings, and refractory panels. Full system replacement is only needed when the metal flue itself has failed.
How do I know if my Chino chimney needs repair or just a sweep?
If the only issue is accumulated creosote or nesting, a sweep handles it. Repair signs include visible rust, water staining near the chimney, cracked panels inside the firebox, or a cap that’s loose or missing. Call (833) 589-8498 and we’ll tell you which one you need.
Brands We Service in Chino
We service and install chimneys and components from professional trade lines including Olympia Chimney, Gelco, and Copperfield. We keep common parts stocked for faster turnarounds on typical Chino tract-home repairs, so most jobs don’t wait on shipping. See our brands for details.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Chino, CA
| Service | Typical range in Chino |
|---|---|
| Chimney sweeping | $189 – $350 |
| Chimney cap installation | $300 – $600 |
| Chimney flashing repair | $350 – $700 |
| Chimney crown repair | $500 – $1,200 |
| Chimney liner installation | $2,500 – $5,000 |
| Dryer vent cleaning | $125 – $200 |
In Chino, the main variable on repairs is roof access: two-story homes and steep pitches add time and safety equipment. On liner work, the flue length and whether insulation is required move the number. Every job is quoted with a flat price before we start, so there are no surprises on the invoice.
Neighborhoods We Serve in Chino
We work throughout Chino, including the 91708 and 91710 ZIP codes. Response time in the area is usually two to four business days, with more availability in the spring and summer months when the calendar is less crowded.
- College Park
- The Preserve
- Downtown Chino
- Butterfield Ranch
- Maplewood
Service Area – Cities Near Chino
Serving Chino puts us in the middle of the Inland Empire, and we regularly work in nearby communities. That includes Los Serranos, CA just to the northwest, Montclair, CA and Claremont, CA to the north, and Yorba Linda, CA to the south. If you’re nearby and not sure whether you’re in our coverage area, call (833) 589-8498.
Serving Chino, CA — Our Local Coverage Area
We’re based in the Chino area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Chino
Some Chino neighborhoods, particularly newer master-planned communities in 91708, have HOA rules about exterior modifications including caps and chase tops. We can inspect the work and tell you what’s visible from the street, but checking your HOA covenants is your responsibility before we start.
Fall is our busiest season in Chino, since that’s when cool evenings and Santa Ana winds trigger the first fires of the year. Book in late August or September for the shortest wait. Summer appointments are generally available within a week.
Yes. The 1950s and 1960s ranch homes near downtown Chino often have unlined or clay-tile-lined masonry fireplaces, and we handle crown repair, tuckpointing, liner installation, and flashing work on those systems just as often as we work on newer prefab units.
If your Chino chimney needs a sweep, a repair, or an honest assessment, call Sherwood Chimney Sweep at (833) 589-8498. We’ll give you a straight answer and a flat price before any work begins.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Chino Customers Say
"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Steven Yang"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Tamika Whitfield"Weekend rate was higher, which they told me up front and I was fine with. What I wasn't expecting was for someone to actually come out on a Sunday."
— Ernesto Reyes