Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Burbank, CA
Burbank’s chimneys carry a specific set of problems. The housing stock runs heavily to 1920s through 1950s construction, which means original clay tile liners, masonry built for wood burning, and decades of heating and cooling cycles that crack spalling brick and mortar joints. Sherwood Chimney Sweep handles chimney repair in Burbank from the crown down to the firebox, and we’ve served Burbank since 2017. If you need a sweep, a liner, or a full structural repair, call (833) 589-8498 and we’ll tell you what’s actually wrong before quoting a fix.
Why Burbank Homes Are Different
Burbank’s pre-war and mid-century homes were built with masonry fireplaces designed for wood burning, but many now sit unused or have been converted to gas. The South Coast Air Quality Management District bans wood burning on No-Burn days across the San Fernando Valley, so homeowners burn inconsistently, which lets creosote harden into a glaze that’s harder to remove than the fluffy soot from regular use. Add the Santa Ana winds that push debris into uncapped flues in the Verdugo Hills, and you get a recurring pattern: chimneys in Burbank clog from occasional burning plus wind-driven debris. Homes in Magnolia Park and the Rancho district also sit on original 1920s clay tile flues that were never designed for modern gas inserts. Those liners crack, spall, and often can’t pass a Level 2 inspection without relining. Burbank’s hot, dry summers bake any moisture out of masonry, then winter rains drive water back in through uncapped crowns and cracked flashing. The cycle repeats every year.
Styles & brands we work with
Our Main Burbank Services
Most Burbank homeowners call us for one of two reasons: the fireplace hasn’t been swept in years and they want it safe to use, or the dryer vent has never been cleaned and they’re starting to worry about lint buildup. Both are fire-prevention work, and we handle both.
Chimney Sweep in Burbank
A chimney sweep in Burbank usually means clearing creosote from occasional wood burning, removing wind-blown debris from uncapped flues, and checking the condition of older clay tile liners. We sweep from the firebox up using rotary brushes sized to your flue, run a camera inspection, and tell you plainly whether the chimney is safe to use. For the full breakdown of what a sweep includes and what it costs in Burbank, see our dedicated page on Chimney Sweep in Burbank.
Dryer Vent Cleaning in Burbank
Burbank homes built in the 1950s through 1970s often have long dryer vent runs with multiple bends, which collect lint faster than short, straight runs. Lint is the leading cause of household dryer fires, and a clogged vent also makes the dryer run longer on every load. We clean the full run from dryer to exterior termination, inspect for disconnects or crushed pipe, and treat it as fire prevention, not a side job. Details are on our Dryer Vent Cleaning in Burbank page.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Burbank
Chimney repair in Burbank usually comes down to one of three problems: a crown that’s cracked and letting water into the masonry, flashing that’s pulled away from the roofline, or a flue liner that’s deteriorated past the point where it’s safe to use. Homes in Magnolia Park and the Rancho district were built with clay tile liners in the 1920s and 1930s, and after 80 to 100 years of heating and cooling cycles, those tiles crack and spall. Burbank’s wet winters then drive moisture into the cracks, which accelerates the damage. We recommend a camera inspection before quoting any repair so you can see the damage yourself. Sherwood Chimney Sweep handles everything from a cracked crown to a full relining, and our approach is restore before you replace where the flue can still be salvaged. For more on the full scope of our repair work, see Chimney Repair.
Chimney Cap Installation
Signs you need it
You hear birds or animals in the chimney, find debris accumulating in the firebox, or see water staining on the ceiling near the chimney.
What it costs in Burbank
A chimney cap installation in Burbank typically runs $250 to $650 depending on flue size and whether a custom cap is needed.
How we do it
We measure the flue, install a stainless or copper cap sized to your chimney, and secure it so Santa Ana winds won’t shift it.
Chimney Cap Replacement
Signs you need it
The existing cap is rusted through, bent from falling branches, or missing entirely after a windstorm.
What it costs in Burbank
Replacing a chimney cap in Burbank usually falls between $180 and $400 for standard sizes.
How we do it
We remove the old cap, check the flue crown for hidden damage, and install a replacement rated for your flue type.
Chimney Liner Installation
Signs you need it
A camera inspection shows cracked or missing clay tile, or you’re converting an old wood-burning fireplace to gas and the existing flue won’t pass inspection.
What it costs in Burbank
A stainless chimney liner installation in Burbank typically runs $2,500 to $5,000 depending on flue height and access.
How we do it
We run a DuraFlex flexible liner down the existing flue, insulate it where code requires, and connect it to the appliance.
Chimney Flashing Repair
Signs you need it
You see water stains on the ceiling around the chimney, or the flashing has visible gaps, rust, or lifted edges at the roofline.
What it costs in Burbank
Chimney flashing repair in Burbank generally runs $350 to $900 depending on roof pitch and how much flashing needs replacement.
How we do it
We strip the old flashing, install new step and counter flashing, and seal the transition so winter rains stay out.
Chimney Crown Repair
Signs you need it
The concrete crown has visible cracks, is spalling, or has gaps where it meets the flue tile.
What it costs in Burbank
Crown repair in Burbank typically costs $450 to $1,200 depending on the size of the crown and whether it needs a full rebuild.
How we do it
We remove loose material, re-form the crown with a proper overhang and weep holes, and seal it with a flexible crown coat.
What Chimney Repair Costs in Burbank
| Item | Typical range in Burbank |
|---|---|
| Chimney cap installation | $250 – $650 |
| Chimney cap replacement | $180 – $400 |
| Chimney liner installation | $2,500 – $5,000 |
| Chimney flashing repair | $350 – $900 |
| Chimney crown repair | $450 – $1,200 |
Do I really need a new liner, or can the old one be repaired?
It depends on what the camera shows. Cracked clay tiles can sometimes be resurfaced with HeatShield ceramic sealant rather than torn out and replaced. If the flue is structurally sound but missing mortar or has hairline cracks, resurfacing saves thousands compared to a full liner install. If the tile is collapsed or the flue is too narrow for a gas insert, relining is the only safe option. We’ll show you the footage and explain which applies.
Can you repair my chimney the same week I call?
Most repairs in Burbank are scheduled within one to two weeks once the inspection is done and we’ve ordered materials. Small jobs like crown sealing or cap replacement can often be done faster. Bigger jobs like a full liner install depend on flue access and material availability, but we’ll give you a firm date when you book. Call (833) 589-8498 and we’ll get you on the schedule.
Brands We Service in Burbank
We stock and install DuraFlex liner systems, HeatShield ceramic resurfacing products, and Olympia Chimney and Copperfield components. Parts for common Burbank repairs are usually on the truck or available within a few days. See our brands for the full lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Burbank, CA
| Service | Typical range in Burbank |
|---|---|
| Chimney sweep | $180 – $320 |
| Dryer vent cleaning | $150 – $300 |
| Chimney cap installation | $250 – $650 |
| Chimney cap replacement | $180 – $400 |
| Chimney liner installation | $2,500 – $5,000 |
| Chimney flashing repair | $350 – $900 |
| Chimney crown repair | $450 – $1,200 |
Prices in Burbank run higher where roof access is difficult, as on some hillside properties near Verdugo Hills with steep pitches, and where old masonry needs extra prep before repair. You’ll get a flat-price quote before any work starts, and we don’t recommend anything you haven’t seen for yourself on camera.
Neighborhoods We Serve in Burbank
We work throughout Burbank, including the older bungalow blocks and the newer tracts near the airport. Most areas can be reached within 30 to 45 minutes from our El Monte base.
- Magnolia Park
- Rancho district
- Verdugo Hills
- Northwest Burbank
- Airport district
Service Area – Cities Near Burbank
Chimney work follows the housing stock, and we see the same 1920s and 1930s masonry in the neighboring cities as we do in Burbank. We serve Universal City, CA, Glendale, CA, La Crescenta-Montrose, CA, and Tujunga, CA. If you’re in one of those areas and need a sweep or a repair, the same crew and the same flat-price approach applies.
Serving Burbank, CA — Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Burbank
Most repair work like cap replacement, crown sealing, and flashing repair doesn’t require a permit. A full liner replacement or any structural masonry rebuild may need city approval, and we’ll tell you before work starts if a permit applies to your job.
We schedule most Burbank appointments within one to two weeks, and smaller jobs can often be booked sooner. We route Burbank alongside our other San Fernando Valley stops, so call (833) 589-8498 and we’ll find the earliest slot that works for you.
No. In Burbank, the opposite is often the problem: occasional burning on non-No-Burn days leaves creosote that hardens between fires, and uncapped flues collect debris from Santa Ana winds. We recommend an annual sweep even if you only burn a few times per season.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Burbank Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Diego Herrera"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Steven Yang"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Tamika Whitfield