Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Fast, Reliable Dryer Vent Cleaning Across Inglewood
Dryer vent cleaning in Inglewood typically runs $149 – $289 for a standard single-story home, and most jobs are completed the same visit we scope the line. The real cost driver in this city isn’t the duct length. It’s what the vent connects to. Inglewood’s housing stock is dominated by 1920s – 1940s Spanish Colonials and Craftsman bungalows, where dryers were often added decades after the home was built and vented into whatever chase or flue was handy. We know those setups because we work them every week. Call (833) 589-8498 and we’ll give you a straight answer before any work is booked.
Why Sherwood Chimney Sweep Is Inglewood’s Preferred Dryer Vent Cleaning Company
We earned our reputation in Inglewood the honest way: we ran cameras into flues other companies never looked at and showed homeowners what was actually there. That matters in a city where the old housing stock hides restrictions nobody sees from the outside. A dryer vent call in the 90301 flats off Market Street isn’t the same job as one in the 90305 tract homes north of Century. The vent may tie into a clay-tile chimney flue that hasn’t been opened since a 1960s wall-furnace conversion, or it may dead-end at a rusted-open damper inside the firebox throat. Sherwood Chimney Sweep is a full-service chimney and venting contractor, not a duct-only shop. That means when a dryer run shares space with an old flue, we diagnose the whole system, not just the foil pipe.
Our techs know the blocks around downtown Inglewood, the neighborhoods off La Brea and Prairie, and the hillside streets near the 405 where Santa Ana winds do strange things to draft. We carry professional-grade materials from the same supply lines used by certified chimney engineers, so when something does need repair, the fix is built to last, not patched with big-box parts. Noel Carver built this company around a simple rule: nothing gets recommended until the homeowner sees the camera evidence.
Styles & brands we work with
Our Dryer Vent Cleaning Services in Inglewood
Dryer Vent Cleaning with Full-Run Camera Inspection
Every dryer vent we clean in Inglewood gets a camera run through the full length before and after the brush. That’s not an upsell add-on. It’s how we know the vent is actually clear, and it’s how you know too. In the 90301 and 90302 flats especially, old vent runs make turns nobody would install today, and a blind brush can leave lint behind a bend or against a damper you didn’t know was there. We find it, we show it to you on the screen, then we clear it.
Dryer Vent Inspection When the Dryer Shares a Chimney Flue
This is the Inglewood-specific job we run into constantly. A 1930s bungalow gets a wall furnace in the 1960s, the original fireplace gets capped, and the dryer gets vented into the old flue because it was the path of least resistance. Decades later, that flue is packed with lint against a damper plate that rusted open. We scope the entire run, assess whether the dryer transition is actually safe, and tell you plainly whether the vent can be brought up to standard or needs re-routing. If we recommend a liner, you’ll see why on the camera before you spend a dime.
Level 2 Inspection for Shared-Flue Dryer Setups
When a dryer shares a chimney flue with a dead furnace or an old fireplace, a brush-and-go cleaning isn’t enough. A Level 2 inspection is the right call. We run a camera from the dryer outlet through the entire flue, checking the smoke chamber, the throat, and the cap. In Inglewood’s older homes, this is where we find second-degree creosote glazed onto clay tile by years of marine-layer damp. The camera documents everything. If the flue is sound, we say so and you save your money. If it’s not, you’ll see exactly why.
Chimney Cap and Damper Assessment Tied to the Dryer Run
A dryer vent that terminates at a chimney needs a working cap and a damper that isn’t rusted open or sealed shut. In Inglewood’s marine air, exterior dampers corrode faster than people expect. We check the cap, the damper, and the termination point as part of every shared-flue dryer cleaning. If the cap needs replacement, we stock options from Copperfield and Famco, and we’ll install them the same visit.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Inglewood
We work with professional-trade materials because Inglewood’s older homes punish cheap parts. When a dryer vent cap needs replacing on a 1930s Spanish Colonial near downtown, we install a Copperfield or Famco cap, not a hardware-store knockoff that’ll rust through in two winters. We stock and install DuraFlex flexible liner systems when a flue truly needs relining, and we’re certified to apply HeatShield ceramic resurfacing when a clay-tile flue can be restored instead of torn out. Our supply chain runs through Olympia Chimney, one of the most respected professional distributors in the trade. For Inglewood customers, that means the right part is usually on the truck, not on backorder.
Common Dryer Vent Cleaning Problems We See in Inglewood Homes
- Capped 1960s wall-furnace stacks with dryer runs tied in. The original fireplace got sealed, the furnace was converted to a wall unit, and someone routed the dryer into the dead flue. Lint packs against the old damper and the vent stops breathing. We see this in the 90301 and 90302 flats more than anywhere else we work.
- Rusted-open dampers inside the firebox throat. Marine air off the coast works on old cast-iron damper plates for decades. By the time we arrive, the damper is frozen open, and lint has collected against it like a second filter. The vent isn’t just clogged. It’s a fire waiting on a hot dryer cycle.
- Spalled exterior brick letting moisture into the flue chase. Inglewood’s cool foggy months keep masonry damp, and the warm dry Santa Anas pull moisture out fast. That cycle spalls brick faces on 1930s chimneys, opening paths for damp air into the same wall cavity the dryer vent passes through. Damp lint doesn’t blow clear. It glazes.
- Undersized original flues for modern dryers. A 1930s clay-tile flue was never sized for a modern dryer’s airflow demands. When someone adds a high-output dryer vent run to that same flue, the system backs up. We measure and scope before we brush, so we know if the restriction is lint or simply an old flue that was never meant to carry what it’s carrying.
See the difference
Before
After
Before
After
Before
AfterPricing for Dryer Vent Cleaning in Inglewood, CA
A standard dryer vent cleaning in Inglewood runs $149 – $219 for a single-family home with an accessible vent run. Longer runs, second-story terminations, and shared-flue setups push that to $229 – $289. A Level 2 inspection with full camera documentation runs $249 – $329. If we find a restriction that needs more than a brush, we’ll show you the footage and quote the repair before touching it. We don’t quote a flue liner on an unlined 1930s stack before a camera has passed the smoke chamber. That’s the kind of game that gives this trade a bad name, and Inglewood homeowners have seen plenty of it. Call (833) 589-8498 for a free estimate. We’ll tell you what we think it needs, and more importantly, what it doesn’t.
We Also Serve Cities Near Inglewood
Our crews cover Inglewood and the surrounding communities, including Westmont, Gardena, West Athens, and West Rancho Dominguez. If you’re just outside our service area, call anyway. We’ll tell you straight whether we can get there and when. Our Dryer Vent Cleaning team works the whole corridor, and we keep our schedule built around Dryer Vent Cleaning in Inglewood and the neighboring blocks.
Serving Inglewood, CA — Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs – Dryer Vent Cleaning in Inglewood
No, not safely, and that’s the single most common problem we find in the 90301 and 90302 flats. When a wall furnace conversion left the original chimney capped, the flue was never designed to carry dryer exhaust. Lint packs against the old damper plate, the termination is wrong, and the whole run becomes a fire hazard. We need to scope the flue, assess the dryer transition, and usually re-route the vent to terminate properly outside. The good news: we can often do that without a full liner replacement. Call (833) 589-8498 and we’ll walk you through what your specific setup needs.
Yes. The 1960s – 70s tract homes north of Century were built with prefab metal fireboxes and dedicated vent chases, so a dryer vent in 90305 is usually a duct-only job. The 90301/90302/90303 flats are a different animal entirely, with original clay-tile flues and masonry that’s seen 80 years of marine air. We price and prep differently for the two. A camera run tells us which one you’ve got before we even brush.
The coastal marine layer keeps Inglewood chimneys damp through the cool foggy months, and that damp air glazes creosote inside any shared flue. It also corrodes old damper plates and cap assemblies faster than dry inland air ever would. For a dryer vent, the moisture means lint doesn’t stay fluffy and brushable. It compacts and sticks. That’s why we run a camera before we brush in Inglewood: we need to see if it’s loose lint or glazed material, because the fix is different.
They can. The warm, dry Santa Ana events that hit the hillside homes near the 405 create rapid pressure shifts, and a dryer vent that terminates poorly will back-draft or fail to exhaust properly on those days. We’ve taken calls in the hills where the dryer worked fine in the morning fog and started throwing lint back into the laundry room by the afternoon Santa Anas. The fix is usually a termination correction, not a longer brush run, and the camera shows exactly what’s happening.
Never. That’s a hard rule with Sherwood Chimney Sweep. If your dryer shares an old Inglewood flue, we run the camera first, we show you what’s there, and only then do we talk about repair options. If the flue is sound, we say so plainly and you pay for a cleaning, not a liner. If it’s not sound, you’ll see the cracks or the glaze yourself on the screen, and the recommendation won’t be a sales pitch. It’ll be evidence. Call (833) 589-8498 and we’ll put the camera in before anyone quotes you a liner.
Contact Sherwood Chimney Sweep for Dryer Vent Cleaning in Inglewood
If your Inglewood home has a dryer vent that’s never been inspected, or if your 1930s bungalow has a capped chimney and a dryer run that doesn’t seem right, call us. We’ll scope it, show you what we find, and tell you straight whether it needs a cleaning, a repair, or nothing at all. You’ll never get a liner recommendation without camera evidence you’ve seen with your own eyes. Call (833) 589-8498 for a free estimate. We serve all of Inglewood, including 90309, 90310, 90311, and 90312.
Written by Noel Carver, Owner at Sherwood Chimney Sweep, serving Inglewood since the company’s founding.