Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Los Angeles, CA
Chimney repair in Los Angeles starts with an uncomfortable truth: most fireplaces here were never built to burn the way modern homes use them. The 1920s Spanish Colonial bungalows and 1950s ranch houses that fill Koreatown, West Adams, and Hollywood came with decorative masonry chimneys, often unlined or barely lined, meant for the occasional cedar log on a cool evening. Sherwood Chimney Sweep has served Los Angeles since 2017, and the majority of our repair calls are for exactly that: original clay tile liners cracked by decades of settling, crowns that let rainwater pool against the brick, and flue caps that disappeared years ago. We work from the chimney top down, because in this city the problem is rarely the fire itself. It’s what time, earthquakes, and abandonment did to the structure around it. Call (833) 589-8498 for a camera inspection that shows you the actual condition, not a guess.
Why Los Angeles Homes Are Different
Los Angeles chimneys live an unusual life. The climate is warm and dry, so a fireplace might burn twenty or thirty times a year, almost never enough for dangerous creosote glaze to build up. What accumulates instead is debris: palm fronds, sycamore leaves, and the twig-and-soot nests that house sparrows and starlings wedge into uncapped flues. Rainy-season water intrusion through missing caps soaks into old brick and erodes mortar joints. And because many of these fireplaces were decorative from the start, they were often converted to gas or sealed over during remodels in the 1970s and 1980s. We regularly arrive at a Koreatown bungalow where the chimney still stands on the roof but the hearth inside was plastered over years ago. The first step isn’t a sweep; it’s a camera fed down from the top to see what’s actually left. Seismic history matters too: unreinforced masonry chimneys from before 1933 are a well-documented collapse hazard in an earthquake, so repair work in this city often runs straight into code-required bracing and strapping. A straight sweep-then-go model doesn’t fit Los Angeles. The right service has to diagnose before it can clean.
Styles & brands we work with





Our Main Los Angeles Services
Most Los Angeles homeowners call us for one of two reasons: they want the chimney used safely again, or they want the dryer vent cleared before it becomes a fire hazard. Both are fire-prevention jobs at the core.
Chimney Sweep in Los Angeles
A sweep in Los Angeles is less about heavy creosote and more about restoring a flue that sat idle for eight months with a sparrow nest in it. We remove debris, check the liner from top to bottom, and tell you plainly whether the fireplace is safe to burn or needs repair first. In older homes around Hollywood and Koreatown, the sweep often reveals a clay tile liner that cracked long before the current owner moved in. Detailed service information is on our Chimney Sweep in Los Angeles page.

Dryer Vent Cleaning in Los Angeles
Dryer vents clog with lint more than most homeowners realize, and the warm, dry air in Los Angeles makes that lint brittle and quick to ignite. We approach dryer vent cleaning as fire prevention, not a handyman add-on, and we inspect the full duct run, including the exterior termination, just as we would a flue. Homeowners in older apartment buildings and converted duplexes face especially long, convoluted vent runs that trap lint faster. See our Dryer Vent Cleaning in Los Angeles page for the full scope and pricing.

What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Los Angeles

Chimney repair in Los Angeles is centered on structural integrity. The Chimney Repair work we do here covers caps, liners, flashing, and crowns, each of which fails in a predictable way given the local housing stock. Older hillside foundations settle, and that movement cracks clay tile liners; Santa Ana-driven rain finds its way into crown fissures; and years of direct sun and coastal moisture eat away at flashing seals. When a chimney hasn’t been inspected since installation, the repair is often a layered job: secure the top, seal the crown, reline the flue, and verify the whole assembly is earthquake-strapped. We document everything with camera footage so you can see the crack before we ask you to pay for a repair.
Chimney Cap Installation
Signs you need it
Debris, nests, or rust stains at the top of your flue, or water stains on the firebox floor after rain, mean the flue is open to whatever wants in.
What it costs in Los Angeles
Chimney cap installation in Los Angeles typically runs between $350 and $600 for a standard stainless or copper cap.
How we do it
We measure the flue, match the cap to the exact interior dimensions, secure it with screws or adhesive rated for the masonry, and verify the draw remains unobstructed.
Chimney Cap Replacement
Signs you need it
A cap that’s rusted through, missing its screen, lifted off by wind, or letting rain pour in during heavy storms has failed and needs replacement.
What it costs in Los Angeles
Chimney cap replacement in Los Angeles is typically priced from $350 to $600 depending on flue size and material.
How we do it
We remove the old cap, inspect the flue edge for damage, set the new cap in place, and fasten it securely; if the underlying masonry is cracked we address that before finishing.
Chimney Liner Installation
Signs you need it
Cracked clay tiles, gaps between tile sections, or the complete absence of a liner visible on camera mean combustion gases and heat are moving through unprotected masonry.
What it costs in Los Angeles
Chimney liner installation in Los Angeles generally costs between $1,800 and $3,200 for a complete reline of a single-story flue.
How we do it
We size the liner to the appliance, feed it down the flue, connect it to the appliance and cap, and insulate where required; we install DuraFlex flexible systems rather than hardware-store rigid pipe for a lasting fit.
Chimney Flashing Repair
Signs you need it
Dark water stains on the ceiling or wall at the roofline after rain, or gaps between the flashing and masonry, signal a broken seal.
What it costs in Los Angeles
Chimney flashing repair in Los Angeles typically falls between $450 and $900, depending on the extent of the rust or separation.
How we do it
We cut away the failed flashing, install new step and counter flashing in copper or galvanized steel, and seal every joint with a professional-grade chimney sealant, not roof cement.
What Chimney Repair Costs in Los Angeles
| Item | Typical range in Los Angeles |
|---|---|
| Chimney cap installation | $350 – $600 |
| Chimney flashing repair | $450 – $900 |
| Chimney liner installation | $1,800 – $3,200 |
Does a cracked chimney crown actually need to be fixed in Los Angeles, or can I wait?
Yes, you should fix it. A cracked crown lets water into the chimney structure, and in Los Angeles’s dry-wet cycle, that water expands and contracts the masonry until spalling and crumbling brickwork follow. A crown repair is far cheaper than rebuilding the top two feet of chimney.
Do I need a new liner if I never really use my Los Angeles fireplace?
Maybe. The liners we pull out of older Hollywood and Koreatown homes are often original clay tile that cracked from settling and seismic movement, not from heat. If you’re not burning, the liner isn’t a fire hazard now, but it is a structural gap. We’ll tell you if it can wait or if it’s actively degrading.
Brands We Service in Los Angeles
We stock and install products from Copperfield, DuraFlex, and HeatShield, the same lines specified by professional chimney engineers. Because we carry these locally, turnaround on a lined repair or cap replacement doesn’t stall waiting on a parts shipment. See our brands for the full supplier lineup.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Los Angeles, CA
| Service | Typical range in Los Angeles |
|---|---|
| Chimney sweep | $185 – $350 |
| Chimney cap installation | $350 – $600 |
| Chimney flashing repair | $450 – $900 |
| Chimney crown repair | $220 – $480 |
| Chimney liner installation | $1,800 – $3,200 |
| Dryer vent cleaning | $125 – $250 |
| Chimney camera inspection | $150 – $300 |
| Chimney smoke chamber parging | $400 – $900 |
What pushes the price up in Los Angeles is access: older hillside homes with steep or narrow roof access, chimneys that require full scaffolding, and long-abandoned flues that need extensive cleaning before a liner can go in. We quote upfront from the camera findings, so the number you’re quoted is the number you pay.
Neighborhoods We Serve in Los Angeles
We work across the central Los Angeles basin daily, from the 1920s bungalows of Koreatown and West Adams to the Spanish Colonial and Craftsman stock in Hollywood, Silver Lake, and Echo Park. In the 90005 through 90008 ZIPs, we usually schedule within a week; during peak fall requests, allow a few extra days for repairs that need material matching.
- Koreatown
- West Adams
- Hollywood
- Silver Lake
- Echo Park
Service Area – Cities Near Los Angeles
Beyond the central basin, we serve the communities directly around Los Angeles that share the same housing profile, including Koreatown, CA and Echo Park, CA, where original unlined chimneys are common, plus Silver Lake, CA with its hillside access challenges and Hollywood, CA, where many pre-1933 masonry chimneys still stand unreinforced.
Serving Los Angeles, CA — Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Los Angeles
For most central Los Angeles neighborhoods, we can schedule a repair visit within five to seven business days. Emergency-level work, like a fallen cap or active water intrusion during storm events, gets prioritized earlier. Call us at (833) 589-8498 and we’ll give you a straight time window.
Minor repairs like cap replacement, crown sealing, and flashing work don’t require a permit in most Los Angeles single-family homes. Structural rebuilds or liner replacements past a certain scope may, depending on the LADBS rules for your zone. We’ll tell you before any work starts whether a permit is required for your specific project.
Yes. When a fireplace was bricked or plastered over in a remodel, the chimney is still a structure, and we start with a camera inspection from the roof down to determine if the flue is still intact or has become a nesting void. We’ll then tell you what options exist, from full demo to simple capping.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Los Angeles Customers Say
"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Diego Herrera"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Steven Yang"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
— Tamika Whitfield