Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Sierra Madre, CA
Chimney repair in Sierra Madre usually means working on a 1920s or 1930s chimney, not a modern one. Most homes here were built with clay-tile flues or no liner at all, and decades of foothill weather have taken a toll on the mortar and brick. Sherwood Chimney Sweep handles the full range: from a failed chimney cap to a cracked crown to a flue that needs relining before it’s safe to burn again. If you’re seeing water stains or crumbling mortar, call (833) 589-8498 and we’ll tell you what’s actually wrong.
Why Sierra Madre Homes Are Different
Sierra Madre isn’t like the newer tracts in Arcadia or Monrovia. The housing stock here runs heavily to Craftsman bungalows, Spanish Colonial Revival homes, and cottages from the 1900s through the 1930s. Many of those original fireplaces were built with unlined brick or clay-tile flues, and masonry that’s now a century old. That means a routine chimney cleaning in Sierra Madre often turns into an inspection of the mortar joints, the crown, and the flue liner condition. We regularly see erosion from winter rains, hairline cracks that have opened up over decades, and clay tiles that have shifted out of place.
The foothill location adds another layer. Cool winter evenings drive real fireplace use, and when the Santa Anas blow, ember control matters. Properties near the canyon and along hillside streets get oak leaves, twigs, and debris piling into uncapped or poorly capped chimneys. A chimney that hasn’t been inspected in years may have a cap missing entirely, which lets rain and leaves straight down the flue. That combination of age, weather, and leaf load is why we treat every Sierra Madre job as an inspection first.
Styles & brands we work with
Our Main Sierra Madre Services
Most homeowners in Sierra Madre call us first for one of two things: a chimney sweep before burning season, or a dryer vent cleaning they’ve been putting off. Both are fire-prevention work, and both are jobs where the age of the home changes what we find.
Chimney Sweep in Sierra Madre
A chimney sweep here is rarely just a sweep. In a 1920s Craftsman with its original clay-tile flue, we’re checking for creosote buildup, yes, but also for cracked tiles, failed mortar, and whether the flue was ever lined properly. In the Village and the canyon-adjacent streets, we often find chimneys that have never had a modern liner installed. That’s not a scare tactic; it’s what the housing stock actually looks like. For full details on what a Sierra Madre sweep includes and what it costs, see our Chimney Sweep in Sierra Madre page.
Dryer Vent Cleaning in Sierra Madre
Older Sierra Madre homes often have long, awkward dryer vent runs that were added decades after the house was built. Lint accumulates faster in those runs, and a clogged dryer vent is the leading cause of household dryer fires. We clean the full run from dryer to exterior termination, check the vent hood for blockages, and tell you plainly if the ducting itself is deteriorated and should be replaced. See the Dryer Vent Cleaning in Sierra Madre page for pricing and what the job involves.
What happens when you call
- 1
A real person answersNo phone trees — you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Chimney Repair in Sierra Madre
Most chimney repair calls in Sierra Madre go something like this: a homeowner notices water in the firebox, or a neighbor mentions seeing cracks in the brick, or a home inspection before a sale flags the chimney. In this housing stock, the usual culprits are a cracked crown, deteriorated flashing, or a clay-tile flue that’s no longer safe. We repair all of it, and we’re one of the few local companies that can restore a failing flue liner with HeatShield ceramic resurfacing instead of jumping straight to a full tear-out. Here’s the full scope of what we handle, or you can read more on our Chimney Repair hub page.
Chimney Cap Installation
Signs you need it
If there’s no cap on your chimney, or the existing one is rusted through or missing sections, rain, leaves, and animals are getting in.
What it costs in Sierra Madre
Chimney cap installation in Sierra Madre typically runs $200 to $450, depending on flue size and whether a custom cap is needed for an older chimney.
How we do it
We measure the flue opening, select a stainless steel or copper cap that matches, and secure it to the flue with mechanical fasteners, not caulk alone.
Chimney Cap Replacement
Signs you need it
If your existing cap is rusted, dented by falling branches, or no longer sits flush on the flue, it’s letting water through.
What it costs in Sierra Madre
Replacing a chimney cap in Sierra Madre is typically in the $200 to $450 range, similar to a new installation since the old cap has to come off first.
How we do it
We remove the damaged cap, inspect the flue tile beneath for cracks, then install a properly matched replacement and check the fit from every angle.
Chimney Flashing Repair
Signs you need it
Water stains on the ceiling near the chimney, or damp drywall around the fireplace, usually point to failed flashing where the chimney meets the roof.
What it costs in Sierra Madre
Chimney flashing repair in Sierra Madre typically costs $400 to $900, depending on the roofline and whether the old flashing can be patched or needs replacement.
How we do it
We lift the shingles around the chimney, remove the old flashing, and install new step and counter flashing sealed properly against the masonry.
Chimney Crown Repair
Signs you need it
Cracks in the concrete crown, spalling brick near the top, or water pooling on the crown surface mean it’s failing.
What it costs in Sierra Madre
Chimney crown repair in Sierra Madre ranges from $550 to $1,250, depending on whether it’s a surface patch or a full crown rebuild.
How we do it
We clean the crown, address any structural cracks, and apply a proper crown coat material that slopes water away from the flue.
What Chimney Repair Costs in Sierra Madre
| Item | Typical range in Sierra Madre |
|---|---|
| Chimney cap installation or replacement | $200 – $450 |
| Chimney flashing repair | $400 – $900 |
| Chimney crown repair | $550 – $1,250 |
What pushes a Sierra Madre repair higher than the baseline is usually access. Steep hillside rooflines, old chimneys that need custom cap sizing, and multiple issues found during the same inspection all add to the final number. What keeps it honest is that we don’t recommend any repair without showing you photographic evidence from the camera inspection.
Do I really need a new liner, or can the old clay tile be saved?
Often the clay tile can be restored with HeatShield, which resurfacing the flue from the inside without a full tear-out. If the tile has shifted or collapsed, though, a new liner installed through the existing opening is the only safe route. We’ll show you the camera footage either way. Call (833) 589-8498 for an exact quote.
Can a cracked chimney crown wait until next year?
Not in Sierra Madre, where winter rain and foothill moisture will find every crack and widen it. A cracked crown lets water into the masonry, and freeze-thaw cycles do real damage fast. The repair is far cheaper than rebuilding the top of the chimney. Call (833) 589-8498 for a free estimate.
Brands We Service in Sierra Madre
We stock and install professional-grade materials from Copperfield, Olympia Chimney, and Famco, the same supply chain specified by certified chimney engineers. Most common caps, liners, and flashing components can be sourced within days, not weeks. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Sierra Madre, CA
| Service | Typical range in Sierra Madre |
|---|---|
| Chimney sweep (standard) | $195 – $350 |
| Chimney cap installation | $200 – $450 |
| Chimney cap replacement | $200 – $450 |
| Chimney flashing repair | $400 – $900 |
| Chimney crown repair | $550 – $1,250 |
| Dryer vent cleaning | $150 – $300 |
In Sierra Madre, the biggest price drivers are chimney age and access. A hillside property with a steep roof pitch takes longer to work safely, and a century-old chimney with multiple failing components naturally costs more than a single cap swap. We give you the flat price before we start, and we don’t add line items after the fact.
Neighborhoods We Serve in Sierra Madre
We work throughout Sierra Madre’s 91024 and 91025 ZIP codes, from the Village proper to the canyon-adjacent canyon streets. Our typical response time for a scheduled service in Sierra Madre is two to five business days, depending on the season.
- The Village
- Canyon-adjacent hillside streets
- East Sierra Madre
- North of Sierra Madre Blvd
Service Area – Cities Near Sierra Madre
Sherwood Chimney Sweep serves the communities around Sierra Madre as well, including Arcadia, CA, East Pasadena, CA, Mayflower Village, CA, and Monrovia, CA. If your chimney was built in the same foothill era, the problems are likely similar.
Serving Sierra Madre, CA — Our Local Coverage Area
We’re based in the Sierra Madre area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Sierra Madre
Most routine sweeps, cap replacements, and liner installations done through the existing opening don’t require a city permit. Structural rebuilds or significant masonry work may trigger permit requirements. We’ll tell you before work starts if your job falls into that category.
We schedule most Sierra Madre appointments within two to five business days. During peak burning season in October and November, lead times stretch a little. Call (833) 589-8498 and we’ll find the next open slot.
Yes. We work on the steep canyon-adjacent properties in Sierra Madre regularly, and our team is equipped for hillside access. Steep rooflines typically add some labor time, which we’ll reflect in the upfront flat price before we start.
What happens when you call
- 1A real person answersNo phone trees — talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you — the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Sierra Madre Customers Say
"Creosote buildup was worse than I realized. He measured it, showed me the glazing on the flue with the camera, and was honest that we were closer to a chimney fire than I wanted to hear."
— Divya Rao"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
— Diego Herrera"Swept it, capped it, and installed a proper damper. The downdraft smell in the summer that we'd lived with for years is gone."
— Steven Yang